TM 53.94 Piston - Piston, Rings, Pin & Clips (KZ10B Standard) torsion the current Leopard RL engine

the current Leopard RL engine rev-limiter derives from the new 'Parilla X30' - the electrical system on both engines are identical however the ignition cuts are different

and even smaller - 35" x 30" x 12" - with the removal of 2 bolts for the winch mount and 2 pins for the rear wheels

Type: Socorem

4 thou - your own hair follicle is 4 thou) this guarantee's consistency between engine to engine

TM 53.94 Piston - Piston, Rings, Pin & Clips (KZ10B Standard) torsion the current Leopard RL engineTM Piston Kit include piston, ring, 2 circlips, and wrist pin. For use in the TM K9 B C KZ ICC Engines. When using, you must set the ring end gap to 0. 016" 0. 018". Please specify piston size when you order. A newer SwedeTech engine will have the piston size engraved on the outside of the cylinder, to the right of the exhaust port. You can also clean the top of the piston and look for the engraving, it should be on the intake side. Torque Specs 8mm